Babcock valves' angle globe valveANGLE GLOBE VALVE Babcock Valves’ angle pressure seal valves are used for many different aplications where stop or regulating of fluid is required under high pressure and/or temperature conditions.

DESIGN FEATURES

  • Allows installation in any position.
  • Positive shut-off.
  • Disc guiding. For 8” diameter and larger sizes, bodies are provided with three guides at 120o to guide the disc and ensure a good seal between the seating surfaces.
  • Stellited disc, seat and backseat.
  • Welded or integral seat and/or backseat construction.
  • Streamlined body flow areas. Interior contouring gives minimum resistance to flow and lowest achievable pressure drop, eliminating wear producing turbulence.
  • Stem guide collar to prevent stem rotation and serve as indicator for open and close position.
  • Pressure seal design with clamp, easy to disassemble.

AVAILABLE OPTIONS

  • Stop-check type.
  • Impactor handwheel or impactogear operator for large sizes and/or high pressure ratings.
  • Different types of operation.
  • Larger sizes on request.
  • Full range or body/bonnet materials.
  • Full range of trim and packing materials.
  • Plug, ball or conical-needle type disc for regulating service.
  • Flanged or butt-weld ends. Meet design of ANSI B16.34, ANSI B16.5, API 600, BS and DIN.

PRESSURE SEAL BONNET

Babcock valve's angle globe valve pressure seal bonnet detail

Babcock valve’s angle globe valve pressure seal bonnet detail

ASME CLASSIFICATION

Note: Dimensions are in mm, and weight in kg.